2K Universal Gloss Black Paint For Engines and all components.
To get the glossy effect you have to give two coats, so don't think about economizing by giving a little otherwise the paint will become opaque over time.
The catalyst is included in the package and is already dosed for a catalysis by weight of 20% (250 g of base + 50 g of catalyst)
To paint an engine, you need a quantity of paint that varies according to the size of the engine and the number of pieces you intend to work on.
Remember that to paint a frame you need more product, because its shape forces the painter to lose a lot of product in the air, so take this into account when buying the paint
Here are some suggestions on the quantities to use according to the type of engine you have.
2-cylinder engine kit: 2 cans of 250gr of color + 1 primer
4-cylinder engine kit: 2 cans of 250gr of color + 2 primers
- Adheres directly to all metals and light alloys
- High temperature up to 188 degrees maximum peak
- Ideal for all motorcycle, car, marine engines
- Ideal for chassis, rims, radiators, all metal and alloy components
- Withstands petrol after 12 hours at room temperature without cooking
- Homogeneous matte effect
Application
Nozzle gun between 1 and 1.4, pressure 1.5 to 2.5 bar
If you have a bare metal light engine it will take more paint than an already black engine
You can also apply our paint on an engine that has already been painted, as long as the pre-existing paint is in good condition and does not come off the substrate.
This application is valid both for engines and for metal or light alloy pieces
This paint attacks directly and without the need for a primer, but remember that you can still use it if you want to avoid the formation of oxide over the years. Always consider that the paint has the ability to adhere to all metals but does not have anti-oxidant characteristics, therefore it can adhere but will not be able to stop any long-term rust or oxide formation.
1 Scrape off any rust if there is any
2 Scrape off the old paint if it comes off
3 If the engine is bare metal, clean it thoroughly with our aircraft cleaner
4 If the original paint is in good condition, lightly scratch it with 600 grit sandpaper and then 800 dry or wet
5 Dry well and always degrease with an aeronautical cleaner
NB Decide whether to apply the primer. If you have decided to apply it, just shake it, put it in the gun and apply a light coat and immediately, without stopping, a full coat, wait 20 minutes and without sanding it, start applying the varnish.
6 Base mix and catalyst that are already dosed and wait 5 minutes before starting.
NB if you have primed, you do not need to sand it, simply wait 20 minutes after the last coat and then start applying the paint directly. If, on the other hand, 12 hours have passed since its application, then you have to dull it slightly with a dry or wet type 1000 fine sandpaper.
7 Apply a light coat of varnish and wait 5 minutes
8 Apply a heavier coat of paint and wait 5/10 minutes, there is no precise time because it depends on the temperature of the place where you are. Let's just say you'll have to wait about 5 to 10 minutes
9 Apply another loaded coat and this will also be the last
10 Wait 12 hours to assemble the pieces and for it to be resistant to petrol
You can also apply a 2K gloss clearcoat for added petrol resistance and protection
NOTE: two full coats are essential to have a super shiny and petrol resistant appearance, if you give only one coat the resistance degree could be lowered.
To get the best result, we always advise you to do some tests first.
